Metrohm 797 VA Computrace - Manual (Page 10)

1 Introduction
797 VA Computrace / Hardware-Manual 8.797.8001EN
2
1.2 Parts and controls
In this section you will find the numbers and designations of the parts
and controls of the 797 VA Computrace Stand. The numbering applies
throughout the instructions for use, i.e. bold numbers in the text (e.g.
7 ) refer to the parts and controls illustrated here.
Fig. 1: Front of the 797 VA Computrace Stand
1 Mains pilot lamp
lit up when instrument switched on
2 Cover of measuring head arm
hinged
3 Release slide
to release fixture of the lifted measuring
head arm
4 Stopper (6.2709.080)
to close the pipetting opening
5 Holder for measuring vessel
6 Gas wash bottle (6.2405.030)
for inert gas supply (filling with dist.
water, see section 2.2.5)
7 Measuring vessel
when measuring head arm is fully rai-
sed, the measuring vessel can be pulled
forward out of the holder 5
8 Drip pan (6.2711.040)
4
2
5
6
1
7
8
3