Metrohm 797 VA Computrace - Manual (Page 69)

2.10 Connection of 838 Advanced Sample Processor
797 VA Computrace / Hardware-Manual 8.797.8001EN
61
Tubing connections at the measuring head of the 797
Fig. 28: Measuring head for Suppressor determination with the 838 Ad-
vanced Sample Processor
For software settings and measurement procedures: see Software Manual 797 section
8.6, and Online-Help of the <797 VA Computrace Software> section Suppressor
analysis with 838 Advanced Sample Processor and DT or Suppressor analysis with 838
Advanced Sample Processor and RC.
2.10.4 System description for Brightener determination with MLAT
Electrical connection
Before any instruments are attached to the 797 VA Computrace
Stand, the 797 VA Computrace Stand must be switched off using the
mains switch 14.
800 Dosinos for suppressor
standard / sample
(Port 1 Dosino 3)
4-way microtip 6.1824.000
843 Waste (Syphoning pump)
6.1805.470 (already attached) 843 Rinsing pump
6.1805.020 + 6.1819.010
(shorten to 2 cm)
800 Dosino for VMS
(Port 1 Dosino 1)
6.1805.020 + 6.1819.010
(shorten to 2 cm)
Waste
6.1805.180 Waste
6.1819.010