Metrohm 797 VA Computrace - Manual (Page 15)

1.3 Information about the Instructions for Use
797 VA Computrace / Hardware-Manual 8.797.8001EN
7
1.3 Information about the Instructions for Use
Please read through these Instructions for Use carefully before you put
the 797 VA Computrace Stand into operation. The Instructions for Use
contain information and warnings to which the user must pay atten-
tion in order to assure safe operation of the instrument.
1.3.1 Organization
This 8.797.8001EN Hardware Manual for the 797 VA Computrace Stand provides a
comprehensive overview of the installation, operation, and technical specifications of
these instruments. The Instructions for Use are divided into the following 4 sections:
Section 1 Introduction
General instrument description
Numbers and designations of the parts and controls
Safety instructions
Section 2 Installation
Installation of 797 VA Computrace Stand
Installation of working, reference and auxiliary electrodes
Attachment of 700 and 800 Dosinos
Attachment of 685 and 805 Dosimats
Attachment of the 863 Compact Autosampler
Attachment of the 838 Advanced Sample Processor
Section 3 Safety
Electrical safety
Safety considerations in the handling of mercury
Section 4 Appendix
Scope of delivery, options, validation, warranty, certification, in-
dex
To find the required information on the instrument please use either the Table of
contents or the Index at the back.