Breville 800esxl - Manual (Page 19)

• When the red ‘Heating’ light stops flashing,
quickly insert the Steam Wand into the jug of
milk so that the Froth Attachment is just
immersed into the milk.
• Hold the frothing jug at an angle so that the
Frothing Attachment sits just below the
surface of the heating milk and the steam will
move the milk around the inside of the jug in
a circular motion.
• When the milk starts to increase in volume,
immerse the Frothing Attachment deeper into
the jug to heat the milk.
• Hold the jug at an angle with one hand and
place your other hand on the outer base of
the stainless frothing jug.
• When the base of the jug becomes too hot to
touch, set the Selector Control to the
‘Standby’ position, stopping the steaming
function before removing the jug. A pumping
noise will sound for a short time.
• Pour the steamed milk into each cup of
freshly brewed espresso coffee and spoon in
the frothed milk, in the following ratios:
Cappuccino - 1 /
3
espresso, 1 /
3
steamed milk,
1 /
3
frothed milk
Latté - 1 /
3
espresso topped with steamed milk
and about 1 /
4
inch (1cm) of frothed milk
(traditionally served in a glass)
18
HOW TO FROTH MILK FOR A CAPPUCCINO OR LATTÉ
NOTE: When the 800ESXL is creating
steam a pulsing noise can be
heard. This is the normal
operation of the 15 Bar pump.
NOTE: If steam starts coming from
the Steam Wand before it is
immersed in the milk, pause the
steam by turning the Selector
Control back to the ‘Standby’
position. This will avoid the
steam pressure blowing milk
out of the jug. A pumping noise
will sound for a short time. NOTE: The 800ESXL features a Swivel
Steam Wand assembly so
the position of the Steam
Wand can be changed to a
comfortable angle.