Breville 800esxl User Manual
Page 32
31
TROUBLE SHOOTING GUIDE
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
No steam is generated
Machine is not turned on
Ensure the machine is plugged in, switched on at
the power outlet and the ‘on/off’ button is in the
‘on’ position.
Water tank is empty
Refer to step 1 – Filling the water tank on page 13.
Selector Control not in ‘Steam’ position
Turn the selector control to the ‘Steam’ position.
Ensure the steam button is selected for steam and
‘Hot Water’ button selected for hot water.
Steam Wand is blocked
Use the pin on the cleaning tool to clear the
opening. If the steam wand continues to be blocked,
remove the tip of the steam wand using the spanner
in the middle of the cleaning tool. Please refer to
‘Care and cleaning’ on page 25.
Milk is not foamy after frothing
Not enough steam
Steam wand may be blocked. Please refer to ‘Care
and cleaning’ on page 25.
Milk is not fresh and cold
Milk must be cold and fresh. Please refer to ‘How
to froth milk for a cappuccino or latté’ on page 17.