Breville 800esxl - Manual (Page 27)

26
CARE AND CLEANING
CLEANING THE FILTERS, FILTER HOLDER AND
BREWING HEAD
• The stainless steel Filters and Filter Holder
should be rinsed under water directly after
use to remove all coffee particles. Should the
fine holes in the filters become blocked, the
fine pin on the Cleaning Tool can be used to
clear the holes.
• The Brew Head interior should be wiped
with a damp cloth to remove any ground
coffee particles.
• Periodically run water through the machine
with the Filter Holder in place, but without
any ground coffee, to rinse out any residual
coffee particles.
CLEANING THE OUTER HOUSING /
CUP WARMING PLATE
• The outer housing and cup warming plate can
be cleaned with a soft, damp cloth (do not
use abrasive cleansers, pads or cloths which
can scratch the surface).
CLEANING THE DRIP TRAY
• The Drip Tray should be removed, emptied and
cleaned at regular intervals, particularly when
the Drip Tray Full Indicator is showing full.
• Remove the Drip Tray Full Indicator and Grid
from the Drip Tray, wash with warm soapy
water, using a non-abrasive washing liquid,
rinse and dry thoroughly.
• If further cleaning is required the full indicator
can be removed from the drip tray by
releasing the side snaps.
CLEANING THE STORAGE TRAY
• The Storage Tray can be removed after the
Drip Tray is removed then cleaned with a soft,
damp cloth (do not use abrasive cleansers,
pads or cloths which can scratch the surface).
NOTE: Do not clean any of the parts or
accessories in the dishwasher.