Cisco 7912G - Manual (Page 39)

1-11
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Understanding the Requirements for Installing and Configuring the Cisco Unified IP Phone 7905G and 7912G
Note For more information about these features and about Cisco Unified CallManager
and Cisco Unified IP Phone security, refer to Cisco Unified CallManager Security
Guide.
Understanding the Requirements for Installing and
Configuring the Cisco Unified IP Phone 7905G and
7912G
To install and configure the Cisco Unified IP Phone 7905G and 7912G, you must
configure some network settings, set up Cisco Unified CallManager, and make
changes locally on the phone.
See Table 1-2 for an overview of required procedures. For detailed information
about these procedures, refer to the sources shown.
Note You can specify additional configuration settings using profile files stored on the
TFTP server. For more information, see
Appendix A, “Reference List of
Parameters.”