ADS Environmental Services IntelliServe 2.8.1 950026A7 - Manual (Page 115)

Data Presentation 5-41
CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract
© 2010 ADS LLC. All Rights Reserved.
Viewing Uptime Data
This section describes how to generate an uptime chart. Uptime charts enable
you to view and evaluate the amount of data that is available for a single or
multiple entities for each day within a designated period of time. IntelliServe
allows you to generate uptime charts for flow monitors, rain gauges, and location
groups at the monitoring point level.
Generating Uptime Charts
This section describes the process for generating uptime reports for individual
flow monitors and rain gauges.
Note: For instructions on generating uptime reports for multiple
monitoring points or location groups, refer to Generating an Uptime
Chart for a Location Group on page 5-44.
Generate an uptime chart for an individual location in the following way:
1. Select Location > [Flow Monitors or Rain Gauges] from the System
Menu.
IntelliServe displays the Flow Monitors/Rain Gauges window showing all the
locations currently in the database corresponding to the selected location type.
2. Click on the location for which you want to generate the uptime chart from
the Locations column.
The Flow Monitors/Rain Gauges Current Data window displays for the
selected location.
3. Click on the View Monitor Readings tab, and then click on the Uptime
Chart tab.
The Flow Monitor/Rain Gauge Uptime Chart window displays for the selected
location.