ADS Environmental Services IntelliServe 2.8.1 950026A7 - Manual (Page 168)

Location Information 7-7
CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract
© 2010 ADS LLC. All Rights Reserved.
Pseudo Sites
IntelliServe allows you to view the parameters for pseudo sites configured in the
system. The parameters identify the monitoring points assigned to the pseudo
site, the monitoring point or pseudo site located immediately downstream of the
pseudo site, and the method by which IntelliServe determines the travel time
between the pseudo site and the downstream location.
View the pseudo site parameters in the following way:
1. Select Locations > Pseudo Sites from the System Menu to display the list
of pseudo sites in the system.
The Pseudo Sites window displays.
2. Right-click on the location for which you want to view the parameters, and
then select the Parameters option on the popup menu.
The Pseudo Sites Parameters window displays the current information about the
location.
Pseudo Site Parameters window
3. Click the Cancel button to exit this dialog and return to the Pseudo Sites
window.