ADS Environmental Services IntelliServe 2.8.1 950026A7 - Manual (Page 182)

Location Information 7-21
CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract
© 2010 ADS LLC. All Rights Reserved.
 Confirmations This section contains the table providing the details
for all confirmations available in the database.
− Date/Time This column represents the dates and times at which
field confirmations were performed.
− Method This column represents the type of confirmations
performed. Q represents a quantity confirmation (such as a weir);
V represents a velocity/depth confirmation.
− Depth This column represents the manual depth measurements
taken at the monitoring point (+/- represents the margin of error of
the depth measurement).
− Average Velocity This column represents the average velocities
determined based on the manual peak velocity measurements taken
at the monitoring point and the Average-to-Peak ratios (+/-
represents the margin of error of the peak velocity measurement).
− Quantity This column represents the manual quantity
measurements taken at the monitoring point (+/- represents the
margin of error of the quantity measurement).
− Calculated Quantity This column represents the quantities
calculated using the confirmation information.
Working with Flow Monitor Adjustment Factors
IntelliServe can apply multipliers called adjustment factors to DPROCESSED,
QFINAL, QGROSS, and VPROCESSED values when generating graphs and
reports. Adjustment factors are created or modified by a user (with the
appropriate permissions) or an administrator for individual flow monitor
locations at the parameter level. You can create factors for up to all four entities,
and each location can have multiple factors associated with a single entity based
on designated dates on which the factors are applied.
The following sections provide instructions on viewing, creating, and deleting
adjustment factors.
Viewing Flow Monitor Adjustment Factors
View the adjustment factors for a specific flow monitor location from the Flow
Monitor Adjustment Factors window in the following way:
1. Select Locations > Flow Monitors from the System Menu.