ADS Environmental Services IntelliServe 2.8.1 950026A7 - Manual (Page 264)

A-1
CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract
© 2010 ADS LLC. All Rights Reserved.
A P P E N D I X A
Events
This appendix provides descriptions of the events configured as part of IntelliServe
®
.
Please note that, based on your permissions, some users may not have access to all of the
events available through IntelliServe.
Alarm Acknowledged This event indicates that an alarm has been acknowledged.
Auto Clear This event indicates that an alarm has been cleared
automatically.
Cross Check Depth
(detected by monitor) This event indicates that an inconsistency exists between the
readings obtained from two different depth entities at the same
monitoring point for the same date/time stamp.
Cross Check Velocity
(detected by monitor) This event indicates that an inconsistency exists between the
readings obtained from two different velocity entities at the same
monitoring point for the same date/time stamp.
Cryout Test This event indicates that a cryout was initiated manually from
the monitor to test communications.
Data Collect – Failure This event indicates a failure occurred when an attempt was
made to collect data from a location.
Data Collect – Success This event indicates that data has been collected successfully
from a monitor.
Data Collect Event This event indicates that the monitor sent a cryout to
IntelliServe to initiate data collection from the monitor.
EMU AC Power Fail This event indicates that the EMU is no longer receiving power
from the AC power source.
Event Escalated This event indicates an alarm has occurred and the system has
attempted to notify the appropriate users (escalation chain
members for a location or system administrator for a system
alarm).
Flow Imbalance in the
Network (detected by This event indicates that a higher quantity of flow exists
upstream than downstream. This may be the result of a spill,