ADS Environmental Services IntelliServe 2.8.1 950026A7 - Manual (Page 172)

Location Information 7-11
CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract
© 2010 ADS LLC. All Rights Reserved.
− GPS Choose this radio button if you are using the global
positioning system (GPS) method of geographical location
identification which employs use of the Universal Transverse
Mercator (UTM) coordinates system.
 Latitude/Longitude
− Latitude This represents the latitude of the location where the
rain gauge is installed.
− Longitude This represents the longitude of the location where the
rain gauge is installed.
 GPS
− Zone This identifies the UTM zone for the location of the rain
gauge monitor for the GPS method of geographical identification.
− Northing This number identifies the UTM y-coordinate for the
rain gauge.
− Easting This identifies the UTM x-coordinate for the rain gauge
location.
 Address
− Street Address This represents the street address for the
location where the rain gauge is installed.
− City This represents the city for the location where the rain gauge
is installed.
− State This represents the state for the location where the rain
gauge is installed.
− Zip Code This represents the zip code for the location where the
rain gauge is installed.
3. To view coordinates for a different rain gauge, repeat steps 1 and 2.