ADS Environmental Services IntelliServe 2.8.1 950026A7 - Manual (Page 229)

Reports 8-29
CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract
© 2010 ADS LLC. All Rights Reserved.
Data Collect Summary Report sample
Note: When viewing or modifying an existing template, clicking on
the Reset button displays the settings last saved to the database for the
selected template. When creating a new template (before saving any
settings to the database), clicking on the Reset button completely
clears the template. Click on the Cancel button to exit the Configure
Report window and return to the Report Templates window.
10. Click on the Close button to exit the report and return to the Configure
Report window.
Note: If you did not save the report template to the database before
generating the report, save the template now by clicking on the Save
button on the Configure Report window.
Monitor Performance Report
The Monitor Performance report shows the percentage of time that the flow
monitor sensors were generating irregular data during the specified time
period.
A “0” zero percent reading means the sensor was operating normally during
the report's time period. The higher the percentage numbers (up to 100
percent) indicates the more time the sensor was generating data that was
suspect.
Note: Monitor Performance reports are not available for FlowShark,
FlowAlert, or RainAlert series monitors.
Define a template for the monitor performance report in the following way: