ADS Environmental Services IntelliServe 2.8.1 950026A7 - Manual (Page 235)

Reports 8-35
CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract
© 2010 ADS LLC. All Rights Reserved.
• Percent Theoretical Capacity Used This report compares the
maximum quantity values for the specified time period to the Pipe
Capacity of a selected location.
• Severe Rain This report shows which rain gauges had severe rain events
during the specified time period. This report only shows rain data, and
does not include any flow data. For the rain gauge locations, the
administrator defines the criteria, which constitute a severe rain event.
• Excess Generate this report to display average flow rates and volumes
of flows which exceed a predefined threshold. Define the threshold in the
monitoring point parameters (can only be performed by a System
Administrator) using the Flow Rate Threshold parameter. Calculations
for excess values are generated during a data collect or after processing a
.bin file.
Entity Date Ranges Report Template
Create an Entity Date Ranges report template in the following way:
Note: The following procedure involves creating entity date ranges
reports and templates for one or more flow monitors, rain gauges,
pseudo sites, and location groups from the Reports menu. However,
IntelliServe also provides a feature that allows you to create an entity
date ranges report for an individual location at the location level.
Simply select Locations > Flow Monitors/Rain Gauges/Pseudo
Sites from the System Menu, click on the location for which you
want to create the report, click on the Reports tab (and then the
Entity Date Ranges Report sub-tab, if necessary), configure the
parameters to setup the report, and then generate the report. Refer to
relevant steps in the following procedure for descriptions of the
various parameters.
1. Select Reports > Data > Entity Date Ranges from the System Menu.
The Report Templates window displays.
2. Click on the Add button.
The Configure Report window displays the parameters for configuring the
Entity Date Ranges report template.