Collecting data from a location group – ADS Environmental Services IntelliServe 2.8.1 950026A7 User Manual
Page 71
4-4 IntelliServe
User’s Guide
CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract
© 2010 ADS LLC. All Rights Reserved.
Collecting Data from a Location Group
IntelliServe allows you to collect data from all flow monitors, rain gauges and
composite locations that are included in a location group. The collection can take
several minutes, during which, you can continue working in other areas of
IntelliServe as needed. Follow these steps to collect data from a location group.
1. Select Locations > Location Groups from the System Menu.
The Location Groups window displays.
2. Click on the group for which you to collect data.
The Location Groups Assigned Location window displays. This window shows
all the locations currently assigned to the selected group.
Location Groups Assigned Location window
3. Click on the Collect Data from [location group name] button.
IntelliServe requests confirmation to collect data from the location group.