ADS Environmental Services IntelliServe 2.8.1 950026A7 - Manual (Page 133)

Data Presentation 5-59
CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract
© 2010 ADS LLC. All Rights Reserved.
11. Click on the Close button to exit the hydrograph and return to the Flow
Monitor Pump Times window.
Note: Clicking on the Reset button resets the pump time parameters to
the default settings.
Viewing Pump Time Data for a Location Group
IntelliServe allows you to generate a hydrograph(s) and table(s) displaying
pump time data for all or a portion of the locations comprising a location group,
provided you have the appropriate permissions.
Note: This section also includes instructions for viewing data for
multiple monitoring points that may not be included in the same
location group.
Generate a hydrograph and table containing pump time data for the monitoring
points/locations in a location group in the following way:
1. Select Locations > Location Groups from the System Menu.
Note: Generate a hydrograph for multiple monitoring points that are
not associated with the same location group by selecting Locations >
View Monitor Readings > Pump Times and then proceeding to step 4.
IntelliServe displays the Location Groups window listing all of the location
groups currently available in the database.
2. Click on the location group containing the monitoring points/locations for
which you want to view pump time data.
The Location Groups Assigned Locations window displays identifying the
locations included within the selected location group.
3. Click on the View Monitor Readings tab, and then click on the Pump
Times tab.
The Location Group Pump Times window displays.