ADS Environmental Services IntelliServe 2.8.1 950026A7 - Manual (Page 77)

Data Presentation 5-3
CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract
© 2010 ADS LLC. All Rights Reserved.
Viewing Current Data
IntelliServe enables you to view current data (from the last seven days) for flow
monitors, rain gauges, and composite locations. You can view a graphical
representation of the current data for a location on the Current Data tab for a
location. For an explanation of the different location types, refer to Chapter 2,
Maps and Locations.
Note: Your System Administrator is responsible for configuring the
entities that display in the Current Data window.
If the data on the Current Data tab is not current, you can collect the monitor to
get up-to-date readings.
View current data for a location in the following way:
1. From the System Menu, select Locations > [location type] for the type of
location for which you want to view the current data.
IntelliServe displays the [location type] window, listing all the available
locations in the database for the selected location type.
Note: If a specific location does not display on this list (but exists in
the database), you may not have the necessary permission to view that
particular location.