ADS Environmental Services IntelliServe 2.8.1 950026A7 - Manual (Page 269)

B-1
CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract
© 2010 ADS LLC. All Rights Reserved.
A P P E N D I X B
Data Entities
This appendix provides descriptions of the data entities used in IntelliServe
®
. Please
note that, based on permissions, some users may not have access to all of the entities
available in IntelliServe. In addition, some data entities may not be available for
display using all data display formats. The keys associated with each entity indicate the
formats in which each individual entity can be displayed (hydrograph – H; scattergraph
– S; tabular – T).
Note: For entities representing events detected by the monitor, a value of 1
indicates an event is occurring and a value of 0 indicates that conditions have
returned to normal.
AIRTEMP_3
HT
Air
Temperature3 This represents the air temperature
measured by the Surface Combo Sensor.
BTYCRIT
T
(detected by monitor)
Battery Critical This event (Critically Low Battery
Voltage) indicates that the battery requires
replacement.
BTYLOW
T
(detected by monitor)
Low Battery This event (Low Battery Voltage)
indicates that the battery voltage is low
and the battery should be monitored for
replacement.
BTYVOLT
T
(detected by monitor)
Battery Voltage This represents a daily battery reading
from a flow monitor.
BTYVOLT_MODEM
T
Battery Voltage This represents the battery voltage reading
for the wireless modem.