ADS Environmental Services IntelliServe 2.8.1 950026A7 - Manual (Page 122)

5-48 IntelliServe

User’s Guide
CONFIDENTIAL – Covered by ADS Terms of Use and Confidentiality Agreement in Contract
© 2010 ADS LLC. All Rights Reserved.
Viewing Cumulative Rain Data
This section describes how to generate hydrographs or tables containing
cumulative rain and/or rain intensity data from flow monitors and rain gauges.
Cumulative rain data represents the total amount of rainfall that occurred over a
designated period of time. Rain intensity data indicates the rate at which rainfall
occurred within a configured period of time. You can view data in hydrograph/
tabular format for a single location, multiple monitoring points/locations, and a
location group.
Viewing Cumulative Rain Data for a Location
The following section describes the process for viewing cumulative rain data for
a single flow monitor or rain gauge location.
Note: For instructions on generating cumulative rain data for multiple
monitoring points or location groups, refer to Viewing Cumulative Rain
Data for a Location Group on page 5-52.
1. Select Locations > (Flow Monitors or Rain Gauges) from the System
Menu.
IntelliServe displays the Flow Monitor/Rain Gauges window showing all the
locations currently in the database for the selected location type.
2. Click on the name of the location for which you want to view cumulative
rain and/or rain intensity data.
The Flow Monitor/Rain Gauge Current Data window displays for the selected
location.
3. Click on the View Monitor Readings tab, and then click on the
Cumulative Rain tab.
The Flow Monitor/Rain Gauge Cumulative Rain window displays for the
selected location.