B&G H2000 Pilot *DISCONTINUED* - Manual (Page 25)

h2000 Autopilot User Manual
Part 2 - Operating Information
HB-0842-04
2-13
2.4.9 Auto Gybe
The Autopilot is also able to indicate when it is possible to execute
a Autopilot controlled gybe. When the Gybe Key is pressed the
boat will be steered on to exactly the same Target AWA, but on the
opposite tack.
The Autopilot software controls the steering so that the wind slowly
passes astern of the boat. This ensures the boom and sails are
safely transferred to the opposite tack.
2.4.10 Gybe Zone
When the TWA is in the range -120
o
to +120
o
the boat is sailing in
the gybe zone.
2.4.11 Using the Gybe Key
At any Autopilot Display, when in the gybe zone, the Autopilot
Display will show GYBE. Press the key next to the GYBE legend
to execute an auto gybe sequence.
2.5 STEER TO WAYPOINT
Notes
Before using Steer to Waypoint, check the following points:
(1) The position fixer has a compatible NMEA 0183
interface set-up in accordance with the manufacturer’s
instructions.