B&G H2000 Pilot *DISCONTINUED* - Manual (Page 32)

h2000 Autopilot User Manual
Part 2 - Operating Information
HB-0842-04
2-20
USER TIP
Multiple operations of the keys are added together to give
the required rudder change.
2.6.6 Coarse Rudder Changes
(1) At the Autopilot Display press the < > Keys next to
the << >> legend to move the rudder to port or starboard
in steps of 3
o
.
(2) At the Hand-held Controller press the 10
o
Keys to
move the rudder to port or starboard by 3
o
.
USER TIP
Multiple operations of the keys are added together to give
the required change
2.6.7 Mid Key
Note
When the MID Key is pressed, the rudder will return to the position
set before POWER steer was engaged. If the rudder was set at the
amidships position then the MID Key will return the rudder to that
position.
(1) At any Autopilot Display press the key next to the
MID legend to return the rudder to the amidships position.
(2) At the Hand-held Controller press the Auto/Resume
Key to return the rudder to the amidships position.
2.7 JOYSTICK STEERING
2.7.1 Introduction to Joystick Steering
The joystick allows direct control of the rudder via the Autopilot
Computer for quick and responsive steering. Joystick steering is
engaged and disengaged with the separate Red Joystick Button.
The lever can only be moved to port or starboard. Refer to
Paragraph 2.8.12 to enable joystick steering.