B&G H2000 Pilot *DISCONTINUED* - Manual (Page 28)

h2000 Autopilot User Manual
Part 2 - Operating Information
HB-0842-04
2-16
2.5.4 Dis-engaging the Autopilot
(1) At the Autopilot Display press the Red Off Key. The
Autopilot immediately disengages and returns to manual
steering.
(2) At the Hand-held Controller press the Red Off Key.
The Autopilot immediately disengages and returns to
manual steering.
2.5.5 Changing the Autopilot Course
(1) At the Autopilot Display press the > Key next to the
10° legend to change the Autopilot course to starboard by
10°. The Autopilot previous course is stored in the course
memory and the LAST legend is displayed.
(2) Press the < Key next to the 10° legend to change the
Autopilot course to port. The Autopilot previous course is
stored in the course memory and the LAST legend is
displayed.
(3) At the Hand-held Controller, press the 10° Keys to
change the Autopilot course to port or starboard 10°.
Note
The 1° Keys do not function in the Waypoint mode.
USER TIP
Multiple key operations are added together to give the required
course change, e.g. for a 20
o
course change press the 10
o
Keys
twice.