B&G H2000 Pilot *DISCONTINUED* - Manual (Page 46)

h2000 Autopilot User Manual
Part 2 - Operating Information
HB-0842-04
2-34
2.8.9 Course Alarm Set-Up (CRS A)
The CRS A set-up enables the Course Alarm facility. The Autopilot
will sound an alarm (if an audible alarm is fitted to the instrument
system) and all the system displays flash a warning when the
Autopilot off course error is greater than the value set. The alarm
is temporarily disabled while the boat is turning. There are two
selections:
(a) OFF - The alarm is disabled (default).
(b) 1 to 180 - A number is set in degrees. The alarm is
enabled when the value is entered.
To set-up CRS A:
(1) Press the key shown until CRS A is displayed.
(2) Use the keys shown to adjust the value within the
range OFF to 180
o
.
(3) When the required value is displayed press the key
next to the ENTER legend. Continue with set-up or press
the key next to the EXIT legend to return to the normal
Autopilot display.