B&G H2000 Pilot *DISCONTINUED* - Manual (Page 43)

h2000 Autopilot User Manual
Part 2 - Operating Information
HB-0842-04
2-31
(2) Press the key shown to select the display function of
the bar display when the Autopilot is engaged.
(3) When the required display function is displayed
press the key next to the ENTER legend. Continue with
set-up or press the key next to the EXIT legend to return
to the normal Autopilot display.
2.8.7 Compass Damping Set-Up (C DMP)
The C DMP set-up is the amount of damping (response to change)
applied to the displayed value of compass heading (top digits of
Autopilot Display Unit LCD) and can be set in the range 0 to 99
seconds. The default setting is four.
Note
This does not affect the response of the Autopilot.
To set-up C DMP:
(1) Press the key shown until C DMP is displayed.