B&G H2000 Pilot *DISCONTINUED* - Manual (Page 52)

h2000 Autopilot User Manual
Part 2 - Operating Information
HB-0842-04
2-40
2.10.2 Manual Recovery (All Boats)
(1) Press the MOB as soon as the person is lost
overboard. The alarm will sound (if fitted) and the display
will show the Man Overboard message. The Autopilot
display and the FFDs will now show the bearing and
distance to the person overboard. The bearing will be
flashed three times and then the distance (in Nautical
Miles) once only.
(2) Press the key next to the MOB B legend twice on
any Autopilot display or the Enter Key on any FFD to
acknowledge the man overboard. The displays will stop
flashing and the audible alarm will be silenced.
(3) Maintain a lookout and keep visual contact with the
person in the water. Steer the boat back to the person
overboard following the bearing and distance displays.
The boat can be steered using the course change
buttons when the Autopilot is engaged, or press the Red
Off Key to disengage the Autopilot and steer the boat
manually. Recover the person overboard.
(4) To end the MOB sequence at any time press the key
next to the CANCL on any Autopilot Display twice or
press and hold the MOB for 5 seconds. The displays of
bearing and distance are cancelled and the Autopilot will
return to the normal (previous) setting.
2.10.3 Automatic Recovery (Power Only)
(1) Press the MOB as soon as the person is lost
overboard. The alarm will sound and the display will show
the Man Overboard message. The Autopilot display and
the FFDs will now show the bearing and distance to the
person overboard. The bearing will be flashed three
times, then the distance (in NM) once.
(2) Press the key next to the MOB B legend twice on
any Autopilot Display or the Enter Key on any FFD to
acknowledge the man overboard. The displays will stop
flashing and the audible alarm will be silenced.