Bio-Rad Image Lab™ Software - Manual (Page 183)

Starting Image Lab Security Edition
User Guide | 183
Starting Image Lab Security Edition
When secure mode is enabled, you are prompted to log on when you start the
Image Lab application.
To start Image Lab in secure mode
1. Click the Image Lab icon to start the application.
2. In the Log on to Image Lab dialog box, enter your user name and password.
3. Click OK.
Note: If you have any questions or problems logging on, see your system
administrator.
Electronic Records
Image Lab Security Edition enables you to create secure electronic records as
defined by 21 CFR Part 11. In Image Lab, the following are electronic records:
 Protocol files
 Image files
 Document log files
 Instrument log files
 System log files