F mitsubishi p93/p95 thermal printer, Setting up a thermal printer on windows, Appendix f – Bio-Rad Image Lab™ Software User Manual
Page 227: Mitsubishi p93/p95 thermal, Printer, Fmitsubishi p93/p95 thermal printer
Advertising
User Guide
| 227
F
Mitsubishi P93/P95
Thermal
Printer
Setting up a Thermal Printer on Windows
The printer driver is on the Image Lab™ software installation CD in the Misc folder.
To set up a thermal printer on a Windows system
1.
Install the printer driver.
2.
Open the printer section in Control Panel.
3.
Click the thermal printer icon and select Printing Preferences.
4.
Configure the correct paper size. Select 1280 x 1280 from the dropdown list.
5.
Click OK to apply your changes.
Advertising
This manual is related to the following products: