AVer SA series - Manual (Page 140)

132
4.2 Camera Setting
In the Camera Setting dialog box, click OK to accept the new settings, click Cancel to exit without saving,
and click Default1/ Default2 to revert back to original factory setting.
(1) Camera Icons
Select the camera number you want to adjust the video setting. To select all the cameras, enable the ALL
check box. To select more than one camera, Right click on the camera icon. To select one camera only, Left
click on the camera icon. The camera icon turns red when it is selected. The camera icon will be different
that depends on the camera type user selected.
IP camera icon Analog camera icon
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest
disabling it so that the system won’t detect it as video loss error.
(3) Camera
- Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you can still
record the video and preview it in playback mode.
- Name
Change the camera name
- Description
Add a short comment
(4) Video Adjustment
Adjust the Brightness, Contrast, Hue and Saturation of the selected camera.
(5) Input
Select the type of video camera input you are using.
- Analog Camera
The video source is coming directly from camera that is connected to the SA Series DVR.