AVer SA series - Manual (Page 175)

167
d. Snapshot Interval: a time gap for next snapshot
e. Save Path: a storage path for saving snapshot pictures.
f. Delete image after: Set a snapshot images storage limit on hard disk. When the snapshot
images storage limit has reached, the DVR system will delete the snapshot images from hard
disk.
4.9.1 To Setup Alarm Relay:
1. Next to the Relay Output check box, click Detail.
2. In the Alarm Relay dialog box, select from the available relay list and in
the ON column, set to enable/disable the relay operation when the alarm
is activated.
3. In the Retrieve time check box, you may enable/disable to extend the
relay operation time and set the duration in second.
4. Click OK to exit and accept the setting and Cancel to exit without saving
the setting.
4.9.2 To Setup the Alarm Sound Setting:
1. Next to the Play Warning Sound check box,
click Detail.
2. In the Alarm Sound Setting dialog box, click
to select other wav file from other source
or folder, Play to listen, Record to make a
new copy of a sound.
3. If you click Record, you will be prompted if you
want to replace the file. Click OK to continue
and Cancel to discontinue.