AVer SA series - Manual (Page 196)

188
- Auto record when login
Automatically start video recording when the DVR is executed.
- Auto start Network when login
Automatically connect to network when the DVR is executed.
- Login to compact mode
Switch to compact mode directly when the DVR is executed.
- Guest Mode
Automatically log in Guest mode when the DVR is executed. In guest mode, the functions are limited to
preview and playback only.
(7) Miscellaneous
Enable the conditions in Miscellaneous section you want the system to perform.
- Beep if no signal
Make sound when the video signal is lost.
- Mandatory Record
Always record video when software is running
- Enable Overlay
To enhance video signal for better video quality.
- Screen Saver
Set a period time to enter screen saver mode when system idle.
- Auto Scan Period
Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically switches to the
next video in cycle depending on the set time gap.
- Playback Mode
Select the mode of playback the video.
 Select date and time: Select the date and time which user wants to playback.
 Play the last file: Automatically playback the video from the last hour
 Instant Playback: Automatically playback the video which has just recorded
- Date Format
Select the date format which wants to display in Select date and time playback mode
(8) POS

Advanced
Set from which camera screen to display the data from the POS equipment. To set the text flow, color format,
and POS database export, click Advanced.
1. Mark Show POS Text to allow POS data to be display on surveillance screen.
2. Select the POS data display position on surveillance screen
– Left-Top, Left-Bottom, Right-Top, or
Right-Bottom.
3. To change the POS data font and color, click Font.
4. Mark Remove POS data after the POS data will be delete from DVR hard disk on the day that user has
setup.