AVer SA series - Manual (Page 169)

161
4.9 Alarm Setting
In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the
selected alarm setting, click OK to exit and save the setting, Cancel to exit without saving, and Default to
revert back to original factory setting.
(1)
(2)
(3)
(4)
(5)
(7) (6)
(8)
To set the Alarm Setting:
1. Click Add to insert and set a new alarm setting. Click the items in the (8) Alarm Setting List, if you
want to modify the alarm setting.
2. In (1) Alarm Setting number/Name/Description, display the selected alarm setting number in the list
below. Enter alarm name and description.
3. In (2) Enable Time, the number from 00 to 23 represent the time in 24-hour clock. Click Schedule to
select the time and date that you want to activate or deactivate the alarm function. Select Enable or
Disable and click the block that user want to activate or deactivate the alarm function.
4. In (3) Conditions, you ca n set “Trigger if any” to activate if it falls to one of the conditions or “Trigger if
all ” to activate if it falls to all conditions.
- Motion Detected: select and click on the camera number (01 to 32) to set the condition for the
system to alarm. Right click on the camera number to setup the Continuous trigger duration of
Motion detected. Enter the time period for system to send out the alarm when motion has continuous
detected for a period.