AVer SA series User Manual
Page 91
Advertising
83
RS485 pin hole of System Controller
RS485 to RS232
Converter site
System Controller site
R+
T+
1
R-
T-
2
T+
R+
3
T-
R-
4
4. Connect the RS232 cable to the RS232 port of the RS485 to RS232 converter.
5. Connect another side of RS232 cable to the RS232 port of the DVR server.
6. Power on the System Controller.
7. After hardware installation has complete, please remember to enable the System Controller in DVR
in
8. How to operate the multiple DVRs; please refer to
Please Do Not install System Controller and PTZ camera in RS485 port of DVR server at the same time. It
might cause conflict on operation.
Advertising