AVer SA series User Manual
Page 201
193
(3) Dynamic DNS (Domain Name System)
Enter the Domain Name and Password. To use this feature, go to http:/and register. (see
also
) You will be prompted to enter CD key number, product name, password, and user
information. Use this service if the IP address changes each time when you connect to internet.
(4) Remote Control Server
Enable/disable remote control from remote application (ex. CMS). Enter the remote accessing port in Port
column.
(5) Network Video Configuration
Set up the video quality and frame rate for viewing and transmitting to the remote program. Scrolling adjust
bar to set the Quality level and FrameRate level.
(6) WebViewer Configuration
Activate Enable Anonymous Login to remotely access the DVR server without the need of password. The
default of WebViewer port is 80.
(7) Voice Phone
Voice Phone is a 2-Way Talk feature that allows the client and server to talk via internet using microphone.
Make sure both microphone and speakers work before using this feature. If the Talk to Web-Client is
disabled, the person in the DVR server side can only hear the voice from the client side that is when the
WebCam 2-Way Talk button is activated. (See also
). The default port of voice phone is 9999.
(8) Network Time Synchronization
Adjust the DVR system time same as network time server. Fill in the Time Server IP address or domain
name. Select Automatic Synchronize time to set automatic synchronize time on a daily basis.
(9) Other Configuration
- Enable Original Security Protocol
Enable new version DVR system to accept remote software with former version. For example, if
user uses CMS version 7.5 and connect to DVR server with version 7.7, and then, user has to
enable this option to make it work. It is due to that DVR system has some new security protocol in
DVR with version
7.3 and newer version, and it’s not compatible with old remote software.
- Enable White List
An access permit list for the remote accessing of DVR server. Enter the IP address and click Add.
Or, enter a range of IP address and click Add. To delete the IP from the list, select the IP and click
Delete button. To reset the input, click Clear button.
- Enable HandyViewer
Enable remote users to use a PDA or a mobile phone to access DVR server and select the video
size and quality. (See also