AVer SA series - Manual (Page 255)

247
7. Plug one side of power cord to RAID unit and
another side to power plug outlet 8. Power on the RAID unit
9. Wait for few seconds and slide all the HDD
drawers into RAID unit tightly. To stop beep
sound, press right button. When the message
“Create New RAID?” display on the LCD panel,
press right side button to create the new RAID
drive. 10. When the RAID drive is created, the RAID is
ready for use. User can configure the RAID
drive at
Storage Path of System setup (see also
Chapter 4.1 System Setup )