AVer SA series - Manual (Page 143)

135
 Relay Setting: To setup relay device that is embedded on the camera.
1. Click the drop-down list and select the relay ID number.
2. Enter relay name in Name column
3. The DVR system automatically detects the camera and input relates information. In the Content
section, enter relay description.
4. In the test section, click Test to trigger relay. Red is high and Green is low.
5. Click OK to exit and accept the setting and Cancel to exit without saving the setting.
 Direct Link by IE
Using IE browser to connect to camera and view the real time video. Click Direct Link by IE，the
IE browser will pop up and connect to camera. The video viewing interface will be varied by
different brand of camera.
(6) Noise Reduction
Reduce undesirable video signal and improve the quality of the video.
i
Noise Reduction uses lots of CPU resource. Please use this feature only if it is really necessary.
(7) Auto Brightness Control
Automatically adjust the brightness.
(8) Night View
Automatically adjust the exposure to make the image more visible especially when the site is dark. You can
only use this function when the Auto Brightness Control is enabled.
(9) Enable Deinterlace
To enhance the video quality. Set the Enable Deinterlace mode to #1, if you are capturing motionless
picture and #2, if it captures lots of movement.
(10) Object Counting
Select the two regions on the screen and the system will count the objects that appear from one selected
region to another selected region (See also
Chapter 4.2.1 ).
i
The DVR system only supports 4 channels for object counting.
(11) FaceFinder
To setup the capture of human face image from live or recorded video(See also Chapter 4.2.2 ).
(12) PTZ Tracking
Enable/disable object tracking of the PTZ camera (see also Chapter 4.2.3 )