AVer SA series - Manual (Page 57)

49
3.5 Function Buttons in PTZ Camera Controller
Name Function
(1) Close Exit PTZ camera controller.
(2) Setup Configure PTZ cameras.(see Chapter 3.12 )
(3) AutoPan Operate the PTZ cameras automatically based on the selected camera group preset
position number.
(4) Focus +/- Adjust the focus manually to produce clear image.
(5) Zoom +/- Zoom in and out the image.
(6) Direction buttons Adjust and position the focal point of the PTZ camera.
(7) Camera ID panel Display the PTZ camera number that is being operated.
(8) Save Camera
preset position
Save the PTZ camera preset position number. Select the camera and click the preset
position number and save it.
(9) Camera lens speed
controller
Adjust the moving speed of the PTZ camera lens.
(10) Camera preset
position number
Move the PTZ camera to the preset point.
(11) Group AutoPan Select to automatically operate PTZ camera in group.