AVer SA series - Manual (Page 86)

78
Function Description
(9) Custom
Function
Buttons
To view system information.
Enable/disable recording. Press it to start recording and press again to stop
recording. The authentication password is required for stop recording. Using
keyboard/virtual keyboard to enter the password and press Enter button to
confirm.
Enable/disable network connection. Press it to connect the network and press
again to disconnect the network. The authentication password is required for stop
network connection. Using keyboard/virtual keyboard to enter the password and
press Enter button to confirm.
To enter system setup mode. The authentication password is required to enter
system setup mode. Using keyboard/virtual keyboard to enter the password and
press Enter button to confirm.
i The number buttons of System Controller don ’t support any account and password
entering on DVR server.
To freeze/un-freeze the surveillance screen. Press it to freeze the screen and press
again to un-freeze.
To extend/fold camera tree window.
Open/close PTZ control panel. Press it to call out the PTZ control panel and press
again to close it.
Call out Logout dialog.
(10) Preset/Set
Button
Move the PTZ camera to the selected preset position (see also Setup preset
position and Use Preset ).
To setup the PTZ preset position (see also Setup preset position and Use Preset ).
(11) Enable/disable joystick as a mouse function.
(12) When lights up in green, user can use PTZ related operation (see also PTZ Operation ).
(13) Joystick To control PTZ camera to left, right, up, down, zoom in, and zoom out.
(14) IRIS/Focus
Button
(IRIS)
To adjust the brightness of the image.
(Focus)
To adjust the focus of the PTZ camera.
(15) Enable/disable digital zoom (see also Using Digital Zoom ).
(16) Numeric Key
Pad
~ For numbers entering
i
The number buttons don ’t support any account and password entering on DVR server.
To exit from current status.
& Moving the cursor to left or right.