AVer SA series User Manual
Page 42
34
Name
Function
(1) Exit
- Login: To sign-in in different account. Default user ID is admin and password is
admin.
- Compact: To switch to compact mode
- Guest: To switch to the guest mode. In guest mode, user only can control DVR by
using the remote control (see also
) and the control panel of DVR (see
). The functions are limited to preview and playback function only.
For complete functions of DVR, please login as an administrator.
- Cancel: To exit Logout dialog box
- About: To update patch or find about the software info.
(2) Split Screen Mode
It provides 7 kinds of split display modes for your selection. You can select one of the
split display modes by clicking the following icon.
i
-
If there are only 4 cameras, you won’t be able to switch to 9, 16, 13, and 32 split screen mode.
- The DVR system will save the current operating mode (split screen mode, auto scan, full screen, and
compact mode status) when shutdown DVR application and apply the mode for next login.
- When you are in single screen mode, Right click and Drag a square on the area you want to enlarge.
-
When you are in multiple-screen mode, Right click the video screen of the camera and Drag on where
you want to relocate it. To only display one of the video in the multiple-screen mode, Left click on the
video screen you only want to display.
(3) Status Bar
It shows the current time, system temperature, and
the hard disk’s free space.
(4) Record
To start recording. The button turns violet when it is recording. Click it again and enter
the password to stop.
(5) E-Map
To load up to 8 desired E-Maps in BMP or JPG image format, and locate cameras,
sensors, and relays to desired positions (see also
).
(6) Network
To allow inbound connections. When this function is enabled, the button turns violet.
Click it again to disable all inbound connections.
(7) Setup
When settin
g up the system for the first time, type the word “admin” in the Password
text box to access.
Click
button to configure settings for cameras, recording, network, scheduler,
backup, sensors, relays, alarms and user authentication.
(8) PTZ
To call out a PTZ setup dialog to configure an appointed PTZ camera (see also
).
(9) Preview
Switch to Preview/Advanced mode. This allows you to view live camera display. Press
ctrl + F can freeze the live preview video screen. And then, click Snapshot can save
the freeze video screen.
(10) Playback
Switch to Playback mode. This allows you to view the recorded video file. (see