Dynojet 250i: Torque Module - Manual (Page 22)

Torque Module Installation and User Guide for Model 250i Dynamometers
C H A P T E R 1
Torque Module Installation
1-18
2 Using a 1/2-inch wrench, install the shims, carriage clamps, and nut block using
the bolts and washers removed earlier.
Figure 1-20: Install the Shims, Carriage Clamps, and Nut Block
3 Using the hand crank or power carriage, screw the carriage through the nut bolck.
Figure 1-21: Replace the Carriage