Dynojet 250i: Torque Module User Manual
Page 37
Advertising
T H E TO R Q U E M O D U L E A N D W I N P E P 6
Torque Module Calibration
Version 2
Torque Module Installation and User Guide for Model 250i Dynamometers
A-5
6
Install the calibration arm and weights. Refer to step 7 and Figure 7 on page 6.
Note: You must perform this step the first time you calibrate the load cell.
Or
If you are only performing a Zero Calibration, click Cancel.
Figure A-6: Span Calibration Window
Advertising