Dynos with 4wd attachment—things to check – Dynojet 424xLC2: Installation Guide User Manual
Page 142
Advertising
C H A P T E R 6
Preventative Maintenance
Above Ground Model 424x/424xLC
2
Automotive Dynamometer Installation Guide
6-16
D
YNOS
WITH
4WD A
TTACHMENT
—T
HINGS
TO
C
HECK
• Check the hydraulic motor fluid once every six months, fill as necessary.
• Remove the cap on the hydraulic motor.
• Add additional AW-68 hydraulic fluid as needed.
• Replace the cap.
Figure 6-9: Fill the Hydraulic Motor with Oil
• Inspect the hoses connecting the hydraulic motor to the ram. Replace as necessary
(P/N 11100000).
• Inspect the 4WD dyno movement rails for debris once per month. Clear any debris
from the rails.
AD502
remove cap on
hydraulic motor
Advertising
This manual is related to the following products: