Wiring the hydraulic motor – Dynojet 424xLC2: Installation Guide User Manual
Page 71
Advertising
3-29
4 W D D Y N O I N S T A L L A T I O N
Hydraulic Movement Installation
Version 1
Above Ground Model 424x/424xLC
2
Automotive Dynamometer Installation Guide
W
IRING
THE
H
YDRAULIC
M
OTOR
Verify the motor is wired for your needs. The motor is wired for 110V but can be
changed to 220V.
1
Remove the wiring box cover.
2
Follow the instructions on the cover to wire the motor for 220v. Refer to the
Hydraulic Movement Wiring Diagram in Figure 3-19 on page 3-30.
Figure 3-18: Wiring the Hydraulic Motor
A 558
D
wiring box cover
Advertising
This manual is related to the following products: