Rotating the hydraulic motor – Dynojet 424xLC2: Installation Guide User Manual
Page 69
Advertising
3-27
4 W D D Y N O I N S T A L L A T I O N
Hydraulic Movement Installation
Version 1
Above Ground Model 424x/424xLC
2
Automotive Dynamometer Installation Guide
R
OTATING
THE
H
YDRAULIC
M
OTOR
Before rotating the hydraulic motor, verify the motor is wired for your needs. The
motor is wired for 110v but can be changed to 220v. Refer to “Wiring the Hydraulic
Motor” on page 3-29.
1
Remove the four bolts and washers securing the motor.
Figure 3-16: Removing the Hydraulic Motor
AD486
motor
wiring box cover
Advertising
This manual is related to the following products: