Air can sleeve – Dynojet 424xLC2: Installation Guide User Manual
Page 74
Advertising
C H A P T E R 3
Air Can Sleeve
Above Ground Model 424x/424xLC
2
Automotive Dynamometer Installation Guide
3-32
AIR CAN SLEEVE
When you receive your dyno, the nut holding the air can sleeve will be tight. You will
need to loosen the nut on all four air cans.
Using a wrench, loosen the nut as far as you can. The sleeve will drop down as shown
in Figure 3-21.
Figure 3-21: Air Can Sleeve
AD489
loosen nut
sleeve
shipped placement of
nut and sleeve
correct placement of
nut and sleeve
sleeve
nut
Advertising
This manual is related to the following products: