Kontron AM4901 IPMI User Manual

Page 11

Advertising
background image

AM5901/AM4901

IPMI Firmware User Guide

ID: 1035-8760, Rev. 3.0

Page 11

Payload Power

The nominal 12 V supply power, individually switchable for each slot

PHY

Physical Layer Device

Power Module (PM)

Front accessible Module that controls the power entry, conversion and distribution of
12 V Payload Power to the Modules within a MicroTCA Shelf

Sensor Data
Record (SDR)

A data structure record that describes the properties of a sensor, management
controller or FRU Information device. Defined in IPMI.

Shelf

An electronic assembly consisting of the Subrack, Backplane, Modules, cooling
devices, power subsystems, etc. Also historically known as a chassis. Shelves are
usually mounted in Frames.

Slot

The union of a Connector and a Card Guide that defines the position of one
AdvancedMC, MCH, Power Module, OEM Module or CU. Slots are similar in concept
to the Bays used in the AMC.0 specification. A MicroTCA Subrack typically contains
multiple slots.

Slot Number

Uniquely identifies a slot within a Shelf

System Event Log
(SEL)

Persistent Storage for events as defined by IPMI

Table 1:

Terminology and Acronym Definitions

TERM or ACRONYM

DESCRIPTION

Advertising
This manual is related to the following products: