Supported oem ipmi commands and command extensions, 1 extended standard commands, Get device id command with kontron oem extensions – Kontron AM4901 IPMI User Manual
Page 62
IPMI Firmware User Guide
AM5901/AM4901
Page 62
ID: 1035-8760, Rev. 3.0
8.
Supported OEM IPMI Commands and
Command Extensions
8.1
Extended Standard Commands
8.1.1
Get Device ID Command with Kontron OEM Extensions
COMMAND
LUN
NetFn
CMD
Get Device ID command with Kontron OEM extensions
00h
App = 06h
01h
REQUEST DATA
Byte
Data Field
-
-
RESPONSE DATA
Byte
Data Field
1
Completion Code
2:12
Regular Get Device ID Command response fields
13
Release number 1… of the IPMI controller firmware, e.g. the open ipmi tool ‘ipmitool’ displays
this as ‘SDR’ in the answer on command ‘ipmitool fwum status’.
14
Module Geographical Address (slot number):
1 … = Module in chassis slot 1…
Please note that the MCH always reports 0.
15
Developer's maintenance revision:
0x0 or 0xff identifies a released standard version
0x80…0xfe identifies a released customer version
0x01…0x7f identifies a version under development
16
Reserved