Kontron AM4901 IPMI - Manual (Page 41)

AM5901/AM4901 IPMI Firmware User Guide
ID: 1035-8760, Rev. 3.0 Page 41
18:16 phyDevice --- ID of the used PHY device
>2 = Undefined ID
2 = BCM5464 is selected (applicable e.g. on
MCH AM5901)
1 = BCM5461 is selected (applicable e.g. on
MCH AM4901)
0 = No PHY device is selected.
A, M
15:10 --- --- Reserved ---
9:7 prioMode --- Is set explicit by CLI command “prioopts” and
OEM IPMI command “Set Priority Options
Parameters”. Please refer to the descriptions of
these commands.
0 = AUTO
1 = MANU
2 = OFF
A, M
6:4 activConfigMode --- Is set explicit by CLI command “activopts” and
OEM IPMI command “Set Activation Options
Parameters”. Please refer to the descriptions of
these commands.
0 = AUTO
1 = MANU
2 = OFF
3:1 pwrMngMode --- Is set explicit by CLI command “currentopts”
and OEM IPMI command “Set Current Options
Parameters”. Please refer to the descriptions of
these commands.
0 = AUTO
1 = MANU
2 = OFF
0 supprAM4901Error
BeforeBoardRevR12 bool On AM4901 boards with revision < R12 there is
no MDIO interface assembled. Setting this bit
to 1 prevents setting the red Health LED for
errors being caused by this fact. Please note
that the errors nevertheless are stored in the
error variable as initialization error for the PHY
device or runtime error for the switch device. M
Table 7: Common Options List
Bits Common Options Format Description
Set
Automatic
/
Manual