Kontron AM4901 IPMI User Manual
Page 49
AM5901/AM4901
IPMI Firmware User Guide
ID: 1035-8760, Rev. 3.0
Page 49
6.2.1.5
Backplane Type OM6060 Recognized
The following is a list of the default Environmental Options for the OM6060:
locked = 0
fclockMode = 0
pwrChanPlus4IfIs1ForAmc1 = 0
shAddrDevice = 3
ps1EnDevice = 1
clkDevice = 2
pwrDevice = 2
fanDevice = 4
PCI Express is fully supported because the Fclock is supplied by the backplane. All AMC mod-
ules which require PCIe communications are expected to be an Fclock receiver requiring no
Fclock e-keying. If Fclock e-keying is required, then select fclock mode 'manu' and its param-
eters and refer to CLI command 'fclockopts' and chapter 3.5 E-keying.
6.2.1.6
Backplane Type OM6040D index 0 and index 1 Recognized
The following is a list of the default Environmental Options for the OM6040D index 0/1:
locked = 0
fclockMode = 2
pwrChanPlus4IfIs1ForAmc1 = 0
shAddrDevice = 3
ps1EnDevice = 3
clkDevice = 0
pwrDevice = 4
fanDevice = 5
PCI Express is not fully supported by this MCH because the Fclock is neither supplied by the
backplane nor by the MCH. The Fclock mode is preset to 'spec' i.e. a spec conformant clock
e-keying is preselected. PCI express will work if the Fclock is supplied by a processor AMC and
both processor AMC and I/O AMC are able to process clock e-keying. If not refer to CLI com-
mand 'fclockopts' and chapter 3.5 E-keying. Select fclock mode 'manu' and its parameters.