Kontron AM4901 IPMI - Manual (Page 44)

IPMI Firmware User Guide AM5901/AM4901
Page 44 ID: 1035-8760, Rev. 3.0
The following table provides a listing of all Environmental Options.
Table 8: Environmental Options List
Bits Environmental Options Format Description
Set
Automatic
/
Manual
31 locked bool 1 = All Environmental Options in bits 30
.. 0 are locked against automatic
modifications during adaption to a
new rack. Only manual changes by
e.g. CLI command ‘eopts’ are pos-
sible.
0 = Not locked against automatic
modification
A, M
30:23 --- --- Reserved ---
22:20 fclockMode --- Selected mode of fclock e-keying
0 = Fclock generated by the backplane
Always on or switched on when
PCIe is active. Only port and no
clock e-keying for modules).
1 = Slot specific manual selection of
fclock strategy and topology.
2 = AMC/uTCA specification compliant
Fclock e-keying.
Note: Automatically set when MCH
detects the backplane type only if
not 'locked'. Always automatically
set by CLI command 'fclockopts'
and by OEM IPMI command 'Set
Fclock Options Parameter'.
A, M
19 pwrChanPlus4IfIs1ForAmc1 bool 1 = Corrects the backplane FRU data of
OM6040 type racks
A, M