Kontron AM4901 IPMI - Manual (Page 51)

AM5901/AM4901 IPMI Firmware User Guide
ID: 1035-8760, Rev. 3.0 Page 51
6.2.1.9 Backplane Type OM6063
The following is a list of the default Environmental Options for the OM6063:
locked = 0
fclockMode = 0
pwrChanPlus4IfIs1ForAmc1 = 0
shAddrDevice = 1
ps1EnDevice = 2
clkDevice = 0
pwrDevice = 3
fanDevice = 3
PCI Express is fully supported because the Fclock is supplied by the backplane. All AMC mod-
ules which require PCIe communications are expected to be an Fclock receiver requiring no
Fclock e-keying. If Fclock e-keying is required, then select fclock mode 'manu' and its param-
eters and refer to CLI command 'fclockopts' and chapter 3.5 E-keying.